DPL monoblock progressive divider with inductive control M12

DPL Progressive Divider with Inductive Control M12

A DPL progressive divider with Inductive Control M12 distributes oil or grease in a controlled manner to multiple lubrication points while also enabling electrical monitoring of the lubrication cycle. The movement of an internal piston is detected by an inductive sensor and converted into an electrical signal. This allows the operation of the progressive divider to be automatically monitored by the machine or lubrication system controller.

This category includes DPL monoblock dividers with 6, 8, 10, 12, 14, 16, 18 and 20 outlets.

In a DPL progressive divider, the lubricant supplied by the pump is distributed by several internal pistons. These pistons move sequentially in a fixed order. The movement of each piston enables the next step in the lubrication cycle.

As a result, the individual metering movements are interconnected. If a line or lubrication point becomes blocked and a piston can no longer move, the rest of the progressive cycle is also interrupted. This principle makes the DPL particularly suitable for systems where correct execution of the lubrication cycle needs to be monitored.

Electrical cycle monitoring with Inductive Control

The main difference compared with a standard DPL divider is the inductive monitoring of the piston movement. The sensor detects the mechanical movement of a piston and generates an electrical signal.

This signal can be processed by a PLC or other machine controller. This makes it possible to automatically verify whether the DPL divider is actually performing cycles during a lubrication period.

If the expected piston movement does not occur, this may indicate that the progressive cycle has been interrupted. This version is therefore particularly suitable for machines where the centralized lubrication system needs to be monitored automatically.

This version is equipped with Inductive Control with an M12 connection. The M12 connector provides a practical electrical connection to the machine controller.

Features of the DPL with Inductive Control M12

• Monoblock progressive divider.
• Inductive Control for electrical cycle monitoring.
• Sensor with M12 connection.
• Electrical detection of piston movement.
• Suitable for connection to a PLC or machine controller.
• Available with 6, 8, 10, 12, 14, 16, 18 and 20 outlets.
• Standard metering volume of 200 mm³ per cycle per outlet.
• Suitable outlets can be combined for a higher flow rate.
• For automatic centralized lubrication systems using oil or grease.